Assessment Validation: A Detailed Guide to Validate Assessments

Assessment Validation: A Detailed Guide to Validate Assessments

Blog Article

Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

Despite our extensive coverage on validation, let's re-examine the term. ASQA states that validation is a quality check of the assessment process.

In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.

As per Clause 1.8 of the SRTOs 2015, RTOs are required to ensure that their assessment systems, including RPL, meet training package requirements and are conducted following the Principles of Assessment and Rules of Evidence.

According to the standards, RTOs must conduct two types of validation.

The first type of assessment validation checks that your RTO's assessment aligns with the training package requirements in your scope.

The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.

Therefore, validation is conducted both before and after the assessment. This article emphasizes the first type: assessment tool validation.

Breaking Down the Two Types of Assessment Validation

Comprehending Assessment Validation

As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.

Conversely, post-assessment validation focuses on the implementation side, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

In this article, we will emphasize assessment tool validation.

Conducting Assessment Tool Validation

Now that we understand the two types of validation, let’s explore the details of assessment tool validation.

When to Conduct Assessment Tool Validation

Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.

You don't have to wait for the next validation schedule in your 5-year cycle. Validate new resources as soon as you get them to ensure they’re suitable for students.

Still, this isn't the only reason to perform this type of validation. Conduct assessment tool validation also when you:

- update your resources
- when new training products are added on scope
- course is reviewed by you against training product updates
- learning resources are identified as a risk during the risk assessment

ASQA applies a risk-based regulation approach, expecting RTOs to do regular risk assessments. Hence, student complaints about learning resources are a good reason for assessment tool validation.

Training Products to Validate

Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.

Resources Required for Assessment Tool Validation

Instructional Resources

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.

Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.

Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Assessment Validation Team

Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.

Your validation panel, as a group, must possess:

Vocational competencies and industry skills relevant to the unit being validated

Current knowledge and skills related to vocational teaching and learning

One of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its replacement

Assessment validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student use.

Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.

Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates simplify the validation process, they can introduce judgment errors because there is insufficient space for comments on each assessment item.

We strongly recommend using a more detailed template to inspect each unit requirement and the assessment items that map to them. Here is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Should Be Inspected?

As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Are equal opportunity and access ensured for everyone in the assessment process?

Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?

Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment achieve consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Evidence Key Rules

Validity – Is the evidence showing that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there adequate evidence to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool verify that the work is the candidate’s own?

Currency – Do the assessment tools mirror current units of competency and modern industry practices?

Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Lead by Example

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

diapering

prepare bottle, bottle feed babies and clean equipment

solid food prep and feeding babies

respond to baby signs and cues appropriately

prepare babies for sleep and settle them

monitor and encourage suitable physical exploration and gross motor skills for the age

Having students describe the nappy-changing process for babies under 12 months old doesn’t directly meet the unit requirement. Unless the unit requirement is meant to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this check here single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

Complete or Not Competent

Pay attention to lists. As mentioned earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?

Every assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?

The answer might include:

Obligatory resources

Applicable expenses

Time assigned for activities

Assigned functions and responsibilities

If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.

This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:

Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Possible answers include, but are not limited to:

Weather conditions – isolating the work area, engineering, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolation, engineering controls, administrative controls

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolation, engineering, administrative controls

Equipment or machinery – isolation, engineering controls, administration

Steering clear of double-barrelled questions simplifies responses for students and enables assessors to accurately judge competence.

Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.